Description
Mi 20W Wireless Car Charger
Electric adjustable grip, 20W high-power flash charging*
Electrically adjusts the grip when your drive starts
Automatically grips and begins charging as soon as it touches your phone
No complex cabling required during the drive. Begins fast charging as soon as it touches your phone.
Compatible with most phones on the market that support wireless charging, the grip opens to a maximum width of 81.5mm and easily holds the Mi 9 or iPhone Xs Max.
Maximum power as high as 20W
Breaks the record set by the Mi Wireless Charging Pad*
Ideal for driving with its 20W high-power output. Capable of charging Mi 9 from 0 to 45% in 30 minutes and to full power in a mere 90 minutes.*
Electric grip with sensors
Holds tight even on bumpy roads
Comes with a hidden infrared sensor and an electric adjustable grip that automatically opens and holds the approaching phone.
Secures your phone on bumpy roads, over speed bumps or when you brake sharply.
Step-less adjustment and universal rotation, putting your phone in whatever position you like.
Navigate and charge at the same time
No need to plug in or remove case*
Begins charging as soon as it touches your phone and allows removal with a single hand when you tap the side button.
Effective charging induction distance as far as 4mm, works well with the phone case on.
Glamorous round indicator on a curved glass surface
All the brighter, all the mightier
Integrated 2.5D glass charging panel, improving the cooling efficiency and ensuring a fast charge. The round blue indicator will light up when powered on, staying with you even during night drives
Built-in fan and metal thermal pad
Doubled cooling and added protection
The built-in fan is capable of smart adjustment and active cooling based on the temperature. The passive heat dissipation is just as excellent with the built-in metal bracket that conducts heat quickly. When the phone is charged at a high power, the doubled cooling can considerably reduce the charging time and mitigate the charging efficiency drop caused by overheat protection. It also provides multiple protection against faults such as short circuit, overvoltage, etc.
-
Temperature protection
-
Short-circuit protection
-
Power
protection
-
Overvoltage protection
-
Foreign object detection
-
Doubled
cooling
One-minute installation
Two selectable options
Open the alligator clip and plug it into the air outlet to install the bracket.
Alternatively, you can use the included adhesive dock that works in different locations with multiple car models.
Standard adhesive dock*
Works with multiple car models
Protection by durable silicone
Avoids damage to the air outlet
Customised adapter included
No additional cost
Reserved port on the dock
Works with wired charging too
* The included standard adapter is required to achieve the Mi 20W Wireless Car Charger’s high-power 20W charging function. The function is only compatible with the Mi 9 and does not support the 5V/1A in-car adapter.
* As of February 20, 2019, the Mi 20W Wireless Car Charger had the highest output power among all other Xiaomi wireless chargers.
* All test data is from the Zimi Laboratory. A Mi 9 running the MIUI 10.2.4.0 system was tested. The test was conducted at standard room temperature with a 27W adapter, with the phone turned on and the screen turned off in flight mode.
* The phone case must be less than 4mm thick and must not contain metal material inside or outside.
* The surface must be clean and even. The paste on the back is highly adhesive and forcible removal may cause damage to the upholstery. You are recommended to contact professionals to take care of it.
