Description

Soil moisture sensor has two conducting plates. First plate is connected to the +5Volt supply through series resistance of 10K ohm and second plate is connected directly to the ground.

It simply acts as a voltage divider bias network, and output is taken directly from the first terminal of the sensor pin, which is shown in figure above.

The output will change in the range of 0 – 5 Volt, in proportion with change in content of water in the soil.

Ideally, when there is zero moisture in soil, the sensor acts as open circuit i.e. infinite resistance. For this condition, we get 5V at the output.

For more info

Call: 7543355
Viber : 7543355
Website : https://gadgets.mv